Cat® C0.5 Diesel Engine
Product description
The Cat® C0.5 Industrial Diesel Engine is offered in ratings ranging from 4.1-6.4 kW (5.5-8.6 hp) @ 2000-2800 rpm. These ratings meet U.S. EPA Tier 4 Final emission standards. Ratings: 8.2-10.2 kW (11.0-13.7 hp) @ 2800-3600 rpm are also available for Europe and, depending on applicable emission standards, may be introduced in other regulated areas. Industries and applications powered by C0.5 engines include: Auxiliary Power Units, Compactors/Rollers, Mobile Earthmoving Equipment, Mobile Light Towers and Turf and Landscaping.
Power Rating
- Maximum Power - 13.7HP
- Maximum Torque - 22lb-ft @ 2600 rpm
- Rated Speed - 2000-3600 rpm
- Minimum Power - 11HP
Emission Standards
- Emissions - U.S. EPA Tier 4 Final, EU Stage V
General
- Engine Configuration - In-Line 2
- Bore - 2.6in
- Stroke - 2.8in
- Displacement - 31in³
- Compression Ratio - 23.5:1
- Aspiration - Naturally Aspirated (NA)
- Combustion System - Indirect Injection
- Rotation from Flywheel End - Counterclockwise
Engine Dimensions - Approximate
- Length - 16in
- Width - 14.6in
- Height - 20.6in
- Weight - Net Dry - Basic Operating Engine Without Optional Attachments - 126lb
Standard Equipment:
-
- Air Inlet System
-
- Inlet manifold with choice of inlets.
-
- Control System
-
- Alternator 12 volt 14 amp
- Starter motor 12 volt
- Glow plug starting aid
-
- Cooling System
-
- Belt-driven coolant pump
- Coolant temperature switch
- Choice of cooling fans
-
- Flywheel And Flywheel Housing
-
- U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
-
- Fuel System
-
- Fuel injection pump
- Spin-on fuel filter
- Electronic Shut-off Solenoid (ESOS)
-
- Lube System
-
- Closed circuit breather
- Spin-on lube oil filter
- Lube oil pressure switch
- Lube oil sump
-
- General
-
- Cast iron, engine block
- Cast iron exhaust manifold--side outlet
- Cold start capability to -20° C (-4° F)
- Gradeability 35° continuous
- Paint: Caterpillar yellow, with optional colors available at request