Cat C32 Propulsion Engine (US EPA Tier 3 / IMO II)
-
Power Range
- 61-1450 bhp (46-1072 bkW)
-
Emissions
- U.S. EPA Tier 3 / IMO II emissions certified
-
Aspiration
- Turbocharged-aftercooled aspiration
-
Bore
- 5.71in
-
Stroke
- 6.38in
-
Displacement
- 1959in³
-
Rotation from Flywheel End
- Counterclockwise from flywheel end
-
Configuration
- Vee 12, 4-stroke-cycle diesel
-
Rated Engine Speed
- 1600-2300 rpm
-
Cooling
- Heat exchanger or keel cooled
-
Governor
- Electronic (A4 ECM)
-
Flywheel Housing
- SAE No. 0 with SAE No. 18 flywheel (136 teeth)
-
Oil Change Interval
- 1000 hrs
-
Refill Capacity
- Lube Oil System w/Oil filter change: 146 L (38.5 gal)
-
Minimum Length
- 83.9in
-
Maximum Length
- 89.8in
-
Minimum Height
- 59.3in
-
Maximum Height
- 63.5in
-
Minimum Width
- 57.1in
-
Maximum Width
- 57.3in
-
Minimum Engine Dry Weight
- 6950lb
-
Maximum Engine Dry Weight
- 7160lb
Standard Equipment:
-
- Air Inlet System
-
- Separate circuit aftercooled (SCAC)
-
- Control System
-
-
- Cooling System
-
- Heat exchanger or Keel Cooling
- Watercooled exhaust manifold and turbocharger
- Hard seawater lines – no flexible hoses
- Flanges for cooling connections, ANSI or DIN
-
- Fuel System
-
- Duplex fuel filters with hybrid fuel lines
- Fuel transfer and priming pump
-
- Lube System
-
- Oil fill, simplex filter and dipstick
- Deep or shallow sump oil pan
-
- Mounting System
-
- Adjustable front support mounting system
-
- General
-
- Right or left hand service sides
- Customer wiring and service tool connector
Optional Equipment:
-
- Air Inlet System
-
- Closed crankcase fumes disposal
-
- Alarm And Protection
-
- MECP I control panel
- MECP II or MECP III control panel with Cat® Alarm and Protection System
-
- Charging System
-
-
- Fuel System
-
- Primary fuel filter with water separator, fuel cooler
-
- Lube System
-
-
- Power Take-offs
-
- Front drives including stub shaft and pump drive
- Rear SAE A or B pump drives
-
- Starting System
-
- Starting motors – air, electric or dual
Compare Products