Marine Power Systems

C7.1 Marine Auxiliary Engine (U.S. EPA Tier 3 / IMO II)

Product description

C7.1 Marine Auxiliary Engine (U.S. EPA Tier 3 / IMO II)

Dimensions & Weights
  • Length - 43.1in
  • Height - 35.1in
  • Minimum Width - 31.4in
  • Maximum Width - 33.5in
  • Minimum Engine Dry Weight - 1609lb
  • Maximum Engine Dry Weight - 1676lb
Power Rating
  • Power Range - 208 bkW (280 bhp) @ 2300 rpm
Engine Specifications
  • Configuration - In-line 6, 4-stroke-cycle diesel
  • Emissions - U.S. EPA Tier 3 / IMO II emissions certified (commercial), RCD 2016 compliant, EU Stage IIIA compliant, CCNR Stage II through reciprocity with EU Stage IIIA
  • Rated Engine Speed - 2300 rpm
  • Bore - 4.13in
  • Stroke - 5.31in
  • Displacement - 428in³
  • Aspiration - Turbocharged-aftercooled aspiration
  • Governor - Electronic (A5E2 V2 ECM)
  • Refill Capacity - Lube Oil System w/Oil filter change: 20 L (5.3 gal)
  • Oil Change Interval - 500 hrs
  • Cooling - Heat exchanger or keel cooled
  • Flywheel Housing - SAE No. 03 with SAE 11.5 in flywheel
  • Rotation - Counterclockwise from flywheel end
Standard Equipment:
  • Cooling System
    • Gear driven jacket water pump
    • Corrosion resistant sea water aftercooler
    • Fuel cooler
  • Exhaust System
    • Watercooled turbocharger and exhaust manifold
  • Fuel System
    • Common rail fuel system
    • Electric fuel priming pump
  • General
    • Vibration damper and guard
    • Self-tensioning multi-vee belt drive
  • Lube System
    • Closed crankcase ventilation system
    • Integral engine oil cooler
  • Mounting System
    • Front and rear engine mounting brackets
  • Starting System
    • Starter motors - 12V or 24V
Optional Equipment:
  • Air Inlet System
    • Various 6" water cooled exhaust elbow configurations
  • Cooling System
    • Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
    • Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
    • Jacket water heater
    • Cabin heater (calorifier) connections
  • Fuel System
    • SOLAS double wall high pressure fuel lines kit
  • Lube System
    • Left-hand and right-hand oil dipsticks
    • Transmission gear oil cooler (engine mounted)
  • Protection System
    • Additional engine and transmission sensor packages for on or off vessel monitoring
  • Starting System
    • Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
    • Glow plugs
Compare Products