TL642D Telehandler

Product description

The TL642D is precision engineered to handle any task, offering stability, maneuverability, speed and power in any application.

Operating Specifications
  • Rated Load Capacity - 6500lb
  • Maximum Lift Height - 42ft
  • Maximum Forward Reach - 30ft
  • Top Travel Speed - 21mile/h
  • Capacity at Maximum Reach - 700lb
  • Frame Leveling - 10°
  • Drawbar Pull - Loaded - 19783lbf
  • Capacity at Maximum Height - 6500lb
  • Turning Radius - Over Tires - 12ft
Engine
  • Engine Model - Cat® C3.4B
  • Gross Power - Basic - 100HP
  • Note - Meets U.S. EPA Tier 4 Final emission standards.
Weights
  • Operating Weight - 22002lb
Tires
  • Standard - 370/75-28 Air Duraforce
  • Optional (1) - 370/75-28 Foam Duraforce
  • Optional (2) - 13.00 × 24-16 PR Air
  • Optional (3) - 13.00 × 24-12 PR Foam Filled
  • Optional (4) - 13.00 × 24 Solid
Service Refill Capacities
  • Fuel Tank - 38.3gal (US)
  • Diesel Exhaust Fluid (DEF) Tank - 5.7gal (US)
  • Hydraulic System - 40gal (US)
Boom Performance
  • Boom Up - 15s
  • Boom Down - 10.3s
  • Tele In - 9.5s
  • Tele Out - 16.3s
Work Tools
  • Lumber Forks - Option 1 - [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
  • Carriages - Wide Tilt - 72in
  • Lumber Forks - Option 2 - [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
  • Pallet Forks - Option 1 - [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
  • Pallet Forks - Option 3 - [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
  • Hydraulic IT Coupler - Includes Auxiliary Electrics
  • Carriages - Swing - 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
  • Pallet Forks - Option 2 - [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
  • Carriages - Standard Tilt - 50in
  • Carriages - Dual Fork Positioning - 50in
  • Carriages - Standard Rotate - 50in
  • Cubing Forks - [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
  • Carriages - Side Shift - 48in
  • Carriages - Wide Rotate - 72in
Hydraulic System
  • Gear Pump - Single-section
  • Note - Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
  • System Operating Pressure - 3770psi
  • Auxiliary Hydraulic Pressure - 3481psi
  • Auxiliary Hydraulic Flow - 18gal/min
Braking System
  • Parking Brakes - Wet disc, spring applied hydraulic release on front axle
  • Service Brakes - Inboard wet disc brakes on front and rear axles
Axles
  • Type (1) - Trunnion mounted planetary 55 degree steer axles.
  • Type (2) - High bias limited slip differential on front axle.
Transmission Speeds
  • Forward - 4 speed
  • Reverse - 3 speed
Compare Products