CALL US: 800-937-2326 | PARTS: 800-937-2311  

930M Ag Handler

  • OVERVIEW
  • SPECIFICATIONS
  • STANDARD / OPTIONAL
PRODUCT DESCRIPTION

Engine
  • Engine Model - Cat C7.1 ACERT
  • Maximum Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) - 162 HP
  • Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*) - 160 HP
  • Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*) - 1600 r/min
  • Rated Net Power - 1,600 rpm - ISO 9249 (DIN) (Standard Power Mode: Speed Range 1-3*) - 158 HP
  • Rated Net Power - 1,600 rpm - SAE J1349 (Standard Power Mode: Speed Range 1-3*) - 154 HP
  • Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*) - 141 HP
  • Buckets
  • Bucket Capacities - 3.1-5.0 m3 (4.0-6.5 yd3)
  • Weights
  • Operating Weight - 31876 lb
  • Engine
  • Maximum Gross Power - 164 HP
  • Cab
  • ROPS - ISO 3471:2008
  • FOPS - ISO 3449:2005 Level II
  • Axles
  • Front - Fixed; Locking differential (standard)
  • Rear - Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
  • Buckets
  • Bucket Capacities - Light Material - 3.1-5.0 m3 (4.0-6.5 yd3)
  • Cab
  • Note (1) - The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
  • Note (2) - *The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
  • Dimensions and Operating Specifications (Approximate) - 3.1 m³ (4.1 yd³) Bucket
  • Articulation Angle - 40 degrees
  • Breakout* - 18808 lb
  • Carry Height - Bucket Pin - 2 ft
  • Clearance - Bucket at 45° * - 10.42 ft
  • Clearance - Level Bucket** - 13.33 ft
  • Clearance - Loadover Height** - 11.58 ft
  • Departure Angle - 33 degrees
  • Dig Depth** - 5.3 in
  • Dump Angle at Full Lift - 44 degrees
  • Height - Bucket Pin** - 14.42 ft
  • Height - Ground Axle Center** - 2.17 ft
  • Height - Ground Clearance** - 1.25 ft
  • Height - Ground to Beacon** - 12.08 ft
  • Height - Ground to Cab** - 10.92 ft
  • Height - Overall** - 18.67 ft
  • Length - Hitch to Front Axle - 4.92 ft
  • Length - Overall* - 27.25 ft
  • Length - Rear Axle to Bumper - 6.5 ft
  • Length - Wheel Base - 9.83 ft
  • Note (1) - *Vary with bucket.
  • Note (2) - **Vary with tire.
  • Note (3) - Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
  • Operating Weight* - 31876 lb
  • Rack Angle at Carry - 48 degrees
  • Rack Angle at Full Lift - 51 degrees
  • Reach - Bucket at 45°* - 4.42 ft
  • Tipping Load - Full Turn - ISO 14397-1* - 13934 lb
  • Tipping Load - Straight - ISO 14397-1* - 16430 lb
  • Turning Radius - Inside of Tires - 9.33 ft
  • Turning Radius - Outside of Tires - 17.67 ft
  • Turning Radius - Over Bucket - 20.92 ft
  • Width - Bucket - 9 ft
  • Width - Over Tires - 8.33 ft
  • Width - Tread Center - 6.25 ft
  • Dimensions and Operating Specifications (Approximate) - 3.5 m³ (4.6 yd³) Bucket
  • Articulation Angle - 40 degrees
  • Breakout* - 17246 lb
  • Carry Height - Bucket Pin - 2 ft
  • Clearance - Bucket at 45° * - 10.17 ft
  • Clearance - Level Bucket** - 13.33 ft
  • Clearance - Loadover Height** - 11.58 ft
  • Departure Angle - 33 degrees
  • Dig Depth** - 5.3 in
  • Dump Angle at Full Lift - 44 degrees
  • Height - Bucket Pin** - 14.42 ft
  • Height - Ground Axle Center** - 2.17 ft
  • Height - Ground Clearance** - 1.25 ft
  • Height - Ground to Beacon** - 12.08 ft
  • Height - Ground to Cab** - 10.92 ft
  • Height - Overall** - 19 ft
  • Length - Hitch to Front Axle - 4.92 ft
  • Length - Overall* - 27.58 ft
  • Length - Rear Axle to Bumper - 6.5 ft
  • Length - Wheel Base - 9.83 ft
  • Note (1) - *Vary with bucket.
  • Note (2) - **Vary with tire.
  • Note (3) - Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.
  • Operating Weight* - 32136 lb
  • Rack Angle at Carry - 48 degrees
  • Rack Angle at Full Lift - 51 degrees
  • Reach - Bucket at 45°* - 4.67 ft
  • Tipping Load - Full Turn - ISO 14397-1* - 13592 lb
  • Tipping Load - Straight - ISO 14397-1* - 16070 lb
  • Turning Radius - Inside of Tires - 9.33 ft
  • Turning Radius - Outside of Tires - 17.67 ft
  • Turning Radius - Over Bucket - 21.92 ft
  • Width - Bucket - 9 ft
  • Width - Over Tires - 8.33 ft
  • Width - Tread Center - 6.25 ft
  • Engine
  • Displacement (Performance Power Mode: Speed Range 1-4) - 427 in³
  • Displacement (Standard Power Mode: Speed Range 1-3*) - 427 in³
  • Emissions - Engine meets Tier 4 Final emission standards.
  • Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4) - 166 HP
  • Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4) - 164 HP
  • Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4) - 1800 r/min
  • Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4) - 592 ft·lbf
  • Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*) - 592 ft·lbf
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4) - 572 ft·lbf
  • Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*) - 572 ft·lbf
  • Maximum Net Torque - SAE J1349 (Performance Power Mode; Speed Range 1-4) - 566 ft·lbf
  • Maximum Net Torque - SAE J1349 (Standard Power Mode; Speed Range 1-3*) - 566 ft·lbf
  • Note (1) - Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.
  • Note (2) - Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.
  • Note (3) - *Range 4 power is boosted to be the same as Performance Mode.
  • Rated Net Power - 1,800 rpm - ISO 9249 (DIN) (Performance Power Mode: Speed Range 1-4) - 162 HP
  • Rated Net Power - 1,800 rpm - SAE J1349 (Performance Power Mode: Speed Range 1-4) - 157 HP
  • Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4) - 143 HP
  • Loader Hydraulic System
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height - 1.4 s
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level - 1.8 s
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift - 4.3 s
  • Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time - 7.5 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height - 1.6 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level - 1.8 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift - 4.8 s
  • Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time - 8.2 s
  • Maximum Flow - Implement Pump - 50 gal/min
  • Maximum Flow - Implement Pump - 3rd Function* - 50 gal/min
  • Maximum Flow - Implement Pump - 4th Function Maximum Flow* - 42 gal/min
  • Maximum Working Pressure - Implement Pump - 4061 psi
  • Note - *Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
  • Relief Pressure - Tilt Cylinder - 4351 psi
  • Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure - 4061 psi
  • Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure - 4061 psi
  • Service Refill Capacities
  • Axles - Front - 6.9 gal (US)
  • Axles - Rear - 6.6 gal (US)
  • Cooling System - 7.9 gal (US)
  • Diesel Exhaust Fluid (DEF) Tank - 5 gal (US)
  • Engine Crankcase - 5.3 gal (US)
  • Fuel Tank - 51.5 gal (US)
  • Hydraulic System - Including Tank - 43.6 gal (US)
  • Hydraulic Tank - 23.8 gal (US)
  • Note - DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Transmission - Gear Box - 2.2 gal (US)
  • Steering
  • Maximum Flow - Steering Pump - 34 gal/min
  • Maximum Steering Torque - 0° (Straight Machine) - 37155 ft·lbf
  • Maximum Steering Torque - 40° (Full Turn) - 27747 ft·lbf
  • Maximum Working Pressure - Steering Pump - 3500 psi
  • Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left - 3.5 turns
  • Steering Articulation Angle - Each Direction - 40°
  • Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed - 2.4 s
  • Tires
  • Note (1) - Other tire choices are available. Contact your Cat dealer for details.
  • Note (2) - In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
  • Note (3) - Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Other Choices Include - 20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
  • Standard Size - 20.5 R25, radial (L-3)
  • Transmission
  • Forward and Reverse - Range 1* - 1-13 km/h (0.6-8 mph)
  • Forward and Reverse - Range 2 - 8 mile/h
  • Forward and Reverse - Range 3 - 17 mile/h
  • Forward and Reverse - Range 4 - 25 mile/h
  • Note - *Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
  • Standard Equipment
  • POWER TRAIN
  • HYDRAULICS
  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • OTHER STANDARD EQUIPMENT
  • Optional Equipment
  • OPTIONAL EQUIPMENT
  • COMPARE RELATED MODELS (SELECT UP TO 2)

    You can only compare up to two models. Please remove one of your current selections before making another.

    Compare Products