CALL US: 800-937-2326 | PARTS: 800-937-2311  

910M Compact Wheel Loader

  • OVERVIEW
  • SPECIFICATIONS
  • STANDARD / OPTIONAL
PRODUCT DESCRIPTION

910M Compact Wheel Loader

Engine
  • Net Power - 97 HP
  • Engine Model - Cat C4.4 ACERT�
  • Maximum Gross Power - ISO 14396 - 100 HP
  • Maximum Gross Power - ISO 14396 (DIN) - 101 HP
  • Maximum Gross Power - Maximum Engine Speed - 2350 r/min
  • Maximum Gross Power - SAE J1995 - 102 HP
  • Rated Net Power - Rated Engine Speed - 2200 r/min
  • Rated Net Power - SAE J1349 - 96 HP
  • Weights
  • Operating Weight - 17893 lb
  • Service Refill Capacities
  • Cooling System - 5.7 gal (US)
  • Fuel Tank - 40.7 gal (US)
  • Engine Crankcase - 2.3 gal (US)
  • Hydraulic System - Including Tank - 25.9 gal (US)
  • Operating Specifications
  • Rated Bucket Capacity - 2.5 yd³
  • Engine
  • Maximum Gross Power - 100 HP
  • Buckets
  • Bucket Capacities - 1.3 m3-1.9 m3 (1.7 yd3-2.5 yd3)
  • Cab
  • ROPS - ISO 3471:2008
  • FOPS - ISO 3449:2005 Level II
  • Axles
  • Front - Fixed; Locking differential (standard)
  • Rear - Oscillating �11 degrees; Locking differential (Standard)
  • Cab
  • Note (1) - Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
  • Note (2) - The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
  • Note (3) - The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
  • Note (4) - *The measurements were conducted with the cab doors and windows closed.
  • Engine
  • Bore - 4.13 in
  • Displacement - 268 in³
  • Emissions - Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
  • Maximum Gross Torque - ISO 14396 - 332 ft·lbf
  • Maximum Gross Torque - SAE J1995 - 336 ft·lbf
  • Maximum Net Torque - ISO 9249 - 329 ft·lbf
  • Maximum Net Torque - SAE J1349 - 325 ft·lbf
  • Note - Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
  • Rated Net Power - ISO 9249 - 97 HP
  • Rated Net Power - ISO 9249 (DIN) - 98 HP
  • Stroke - 5 in
  • Loader Hydraulic System
  • Hydraulic Cycle Time - Dump, at Maximum Reach - 1.4 s
  • Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level - 3.7 s
  • Hydraulic Cycle Time - Rackback - 2.2 s
  • Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift - 5.2 s
  • Hydraulic Cycle Time - Total Cycle Time - 12.5 s
  • Maximum Flow - Implement Pump - 32 gal/min
  • Maximum Flow - Implement Pump - 3rd Function, Maximum Flow - 24 gal/min
  • Maximum Flow - Implement Pump - 4th Function, Maximum Flow - 24 gal/min
  • Maximum Working Pressure - Implement Pump - 3408 psi
  • Relief Pressure - Tilt Cylinder - 4931 psi
  • Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure - 3046 psi
  • Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure - 3046 psi
  • Service Refill Capacities
  • Axles - Front Center Differential - 2 gal (US)
  • Axles - Rear Center Differential - 2 gal (US)
  • Diesel Exhaust Fluid (DEF) Tank - 5 gal (US)
  • Hydraulic Tank - 14.5 gal (US)
  • Note - DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
  • Transmission - 0.9 gal (US)
  • Steering
  • Maximum Flow - Steering Pump - 17 gal/min
  • Maximum Working Pressure - Steering Pump - 2683 psi
  • Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left - 3.75 turns
  • Steering Articulation Angle - Each Direction - 40 °
  • Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed - 3.2 s
  • Tires
  • Note (1) - Other tire choices are available. Contact your Cat dealer for details.
  • Note (2) - In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
  • Note (3) - Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
  • Other Choices Include - 15.5-R25; 17.5-25 12PR; 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
  • Standard Size - 15.5-25 12PR
  • Transmission
  • Forward and Reverse - High Range - 25 mile/h
  • Forward and Reverse - Low Range, Speed Range 1* - 6.3 mile/h
  • Forward and Reverse - Low Range, Speed Range 2* - 12.5 mile/h
  • Note - *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.