CALL US: 800-937-2326 | PARTS: 800-937-2311  

793F Mining Truck

  • OVERVIEW
  • SPECIFICATIONS
  • STANDARD / OPTIONAL
PRODUCT DESCRIPTION

Engine
  • Engine Model - Cat C175-16
  • Gross Power - SAE J1995 - 2650 HP
  • Bore - 6.9 in
  • Stroke - 8.7 in
  • Displacement - 5187 in³
  • Note (1) - Power ratings apply at 1,750 rpm when tested under the specified condition for the specified standard.
  • Note (2) - Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 99 kPa (29.61 Hg) dry barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42.780 kJ/kg (18,390 Btu/lb) when engine used at 30° C (86° F).
  • Torque Rise - 20%
  • Weights - Approximate
  • Body Weight Range - 26 862-47 627 kg (59,220-105,000 lb)
  • Chassis Weight - 274587 lb
  • Operating Specifications
  • Nominal Payload Capacity - 250 ton (US)
  • Steer Angle - 36 °
  • Gross Machine Operating Weight - 386 007 or 390 089 kg (851,000 or 860,000 lb)
  • Top Speed - Loaded - 37.3 mile/h
  • Turning Circle - Clearance Diameter - 107 ft
  • Turning Diameter - Front - 93 ft
  • Final Drives
  • Differential Ratio - 1.8:1
  • Planetary Ratio - 16:1
  • Total Reduction Ratio - 28.8:1
  • Transmission
  • Forward - 1 - 8 mile/h
  • Forward - 2 - 10.8 mile/h
  • Forward - 3 - 14.8 mile/h
  • Forward - 4 - 19.9 mile/h
  • Forward - 5 - 27.1 mile/h
  • Forward - 6 - 37.3 mile/h
  • Reverse - 7.3 mile/h
  • Suspension
  • Rear axle - Oscillation - ±4.9 degrees
  • Effective Cylinder Stroke - Front - 5.1 in
  • Effective Cylinder Stroke - Rear - 4.2 in
  • Body Hoists
  • Body Lower Time - Float - 20 s
  • Body Power Down - High Idle - 17.5 s
  • Body Raise Time - High Idle - 19 s
  • Pump Flow - High Idle - 224 gal/min
  • Relief Valve Setting - Raise - 2955 psi
  • Brakes
  • Outside Diameter - 34.5 in
  • Standards - ISO 3450:1996
  • Brake Surface - Front - 13921 in²
  • Brake Surface - Rear - 20847 in²
  • Weight Distributions - Approximate
  • Front Axle - Empty - 49%
  • Front Axle - Loaded - 33%
  • Rear Axle - Empty - 51%
  • Rear Axle - Loaded - 67%
  • Capacity - HP - 100% Fill Factor
  • Heaped (SAE 2:1)* - 162-191 m3 (212-250 yd3)
  • Struck - 112.6-151 m3 (147-197.5 yd3)
  • Service Refill Capacities
  • Brake Hoist System - Includes Tank - 347 gal (US)
  • Cooling System - 284 gal (US)
  • Crankcase - 82 gal (US)
  • Diesel Exhaust Fluid Tank - 62 gal (US)
  • Fuel Tank - 750 gal (US)
  • Rear Axle - Housing - 260 gal (US)
  • Steering System - Including Tank - 77 gal (US)
  • Torque Converter - Transmission Sump - 27 gal (US)
  • Torque Converter/Transmission System - Including Sump - 55 gal (US)
  • ROPS
  • ROPS Standards - ROPS (Rollover Protective Structure) cab offered by Caterpillar meets ISO 3471:2008 for Operator and ISO 13459:2012 for Trainer.
  • Sound
  • Sound Standards (1) - The operator sound pressure level measured according to work cycle procedures specified in ISO 6394 and 6396 is 74 dB(A) for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed.
  • Steering
  • Steering Standards - ISO 5010:2007
  • Body Hoists
  • Note (1) - Twin, two-stage hydraulic cylinders mounted outside main frame, double-acting cylinders in second stage.
  • Note (2) - Power raise in both stages, power down in second stage.
  • Note (3) - Automatic body lower modulation reduces impact on frame.
  • Capacity - HP - 100% Fill Factor
  • Note (1) - Contact your local Cat dealer for body recommendation.
  • Note (2) - *ISO 6483:1980
  • Dimensions (Approximate)
  • Centerline Front Tire Width - 18.4 ft
  • Centerline of Rear Dual Tire Width - 16.28 ft
  • Dump Clearance - 4.27 ft
  • Engine Guard Clearance - 4.35 ft
  • Front Canopy Height - 23.21 ft
  • Ground Clearance - 3.42 ft
  • Height - Top of ROPS - 18.75 ft
  • Inside Body Width - 24.06 ft
  • Loading Height - Empty - 20.28 ft
  • Note - Shown with 162 m3 (212 yd3) HP Body.
  • Outside Body Width - 26.06 ft
  • Overall Canopy Width - 28.09 ft
  • Overall Height - Body Raised - 45 ft
  • Overall Length - 43.83 ft
  • Overall Tire Width - 24.95 ft
  • Rear Axle - Clearance - 3.71 ft
  • Rear Axle - Tail - 13.11 ft
  • Wheel Base - 19.37 ft
  • Engine
  • Emissions - Meets Tier 4 Final emission standards.
  • Note (3) - No engine derating required up to 3200 m (10,500 ft) altitude.
  • Operating Specifications
  • Note - Refer to the Cat Mining Truck 10/10/20 Overload Policy for maximum gross machine weight limitations.
  • ROPS
  • FOPS Standards - FOPS (Falling Objects Protective Structure) meets ISO 3449:2005 for Operator and ISO 13459:2012 Level II FOPS for Trainer.
  • Sound
  • Sound Standards (2) - Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
  • Weights - Approximate
  • Note (1) - Chassis weight with 100 percent fuel, hoist, body mounting group, rims and 40.00R57 tires.
  • Note (2) - Body weight varies depending on how body is equipped.
  • Standard Equipment
  • ELECTRICAL
  • OPERATOR ENVIRONMENT
  • POWER TRAIN
  • OTHER STANDARD EQUIPMENT
  • ANTIFREEZE
  • Optional Equipment
  • OPTIONAL EQUIPMENT
  • COMPARE RELATED MODELS (SELECT UP TO 2)

    You can only compare up to two models. Please remove one of your current selections before making another.

    Compare Products