CALL US: 800-937-2326 | PARTS: 800-937-2311  

Cat | D6T Track-Type Tractor | Caterpillar

  • OVERVIEW
  • SPECIFICATIONS
  • STANDARD / OPTIONAL
PRODUCT DESCRIPTION

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Engine
  • Engine Model - Cat C9.3 ACERT™
  • Flywheel Power - 215 HP
  • Displacement - 567 in³
  • Emissions - U.S. EPA Tier 4 Final
  • Net Power - 2,200 rpm - ISO 9249/SAE J1349 - 215 HP
  • Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm - 245 HP
  • Note (1) - All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Consult your OMM for further machine specific fuel recommendations.
  • Note (2) - Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
  • Service Refill Capacities
  • Fuel Tank - 97.2 gal (US)
  • Cooling System - 12.2 gal (US)
  • Engine Crankcase - 6.5 gal (US)
  • Power Train - 39.1 gal (US)
  • Final Drive - Each - 3.6 gal (US)
  • Hydraulic Tank - 16.5 gal (US)
  • Weights
  • Operating Weight - 47138 lb
  • Operating Weights
  • LGP A - 53829 lb
  • LGP S - 51385 lb
  • XL A - 47846 lb
  • XL SU - 47138 lb
  • XL VPAT - 53042 lb
  • XW A - 49797 lb
  • XW SU - 48909 lb
  • XW VPAT - 54045 lb
  • Blades - Capacity
  • LGP A-Blade - 6.46 yd³
  • LGP S-Blade - 4.96 yd³
  • XL A - Blade - 5.17 yd³
  • XL SU - Blade - 7.26 yd³
  • XL VPAT - Blade - 6.07 yd³
  • XW A - Blade - 5.69 yd³
  • XW SU - Blade - 7.38 yd³
  • XW VPAT - Blade - 6.57 yd³
  • Service Refill Capacities
  • Roller Frames - Each - 6.6 gal (US)
  • Pivot Shaft Compartment - 1.3 gal (US)
  • Blades - Capacity
  • LGP VPAT - Blade - 6.57 yd³
  • Blades - Width
  • LGP A-Blade - 16.6 ft
  • LGP S-Blade - 13.3 ft
  • LGP VPAT - Blade - 13.7 ft
  • XL A - Blade - 13.7 ft
  • XL SU - Blade - 10.7 ft
  • XL VPAT - Blade - 12.7 ft
  • XW A - Blade - 14.8 ft
  • XW SU - Blade - 11.7 ft
  • XW VPAT - Blade - 13.7 ft
  • Dimensions - LGP
  • Ground Clearance - 16 in
  • Ground Pressure (ISO 16754)(3) - 5.11 psi
  • Length - Basic Tractor(2) - 14.5 ft
  • Length - Track on Ground - 10.67 ft
  • Machine Height - To Product Link Antenna(1) - 10.83 ft
  • Note (1) - (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2) - (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3) - (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Width - Tractor - Without Trunnions - Standard Track - 10.5 ft
  • Dimensions - LGP VPAT
  • Ground Clearance - 16 in
  • Ground Pressure (ISO 16754)(3) - 6.28 psi
  • Length - Basic Tractor(2) - 16.42 ft
  • Length - Track on Ground - 10.67 ft
  • Machine Height - To Product Link Antenna(1) - 10.83 ft
  • Note (1) - (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2) - (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3) - (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Width - Tractor - Without Trunnions - Standard Track - 10.33 ft
  • Dimensions - XL
  • Ground Clearance - 15 in
  • Ground Pressure (ISO 16754)(3) - 8.66 psi
  • Length - Basic Tractor(2) - 13.83 ft
  • Length - Track on Ground - 9.25 ft
  • Machine Height - To Product Link Antenna(1) - 10.67 ft
  • Note (1) - (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2) - (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3) - (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Width - Tractor - Without Trunnions - Standard Track - 8 ft
  • Dimensions - XL VPAT
  • Ground Clearance - 15 in
  • Ground Pressure (ISO 16754)(3) - 9.78 psi
  • Length - Basic Tractor(2) - 16.08 ft
  • Length - Track on Ground - 9.25 ft
  • Machine Height - To Product Link Antenna(1) - 10.67 ft
  • Note (1) - (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2) - (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3) - (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Width - Tractor - Without Trunnions - Standard Track - 8.92 ft
  • Dimensions - XW
  • Ground Clearance - 15 in
  • Ground Pressure (ISO 16754)(3) - 6.64 psi
  • Length - Basic Tractor(2) - 13.83 ft
  • Length - Track on Ground - 9.25 ft
  • Machine Height - To Product Link Antenna(1) - 10.67 ft
  • Note (1) - (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2) - (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3) - (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Width - Tractor - Without Trunnions - Standard Track - 9.17 ft
  • Dimensions - XW VPAT
  • Ground Clearance - 16 in
  • Ground Pressure (ISO 16754)(3) - 6.92 psi
  • Length - Basic Tractor(2) - 16.42 ft
  • Length - Track on Ground - 10.67 ft
  • Machine Height - To Product Link Antenna(1) - 10.83 ft
  • Note (1) - (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
  • Note (2) - (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
  • Note (3) - (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
  • Width - Tractor - Without Trunnions - Standard Track - 9.83 ft
  • Engine
  • Build Number - 19
  • Operating Weights
  • LGP VPAT - 54526 lb
  • Note - Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.
  • Service Refill Capacities
  • DEF Tank - 4.5 gal (US)
  • Standard Equipment
  • Power Train
  • Undercarriage
  • Electrical
  • Operator Environment
  • Technology
  • Other Standard Equipment
  • Optional Equipment
  • Power Train
  • Undercarriage
  • Hydraulics
  • Rear Attachment Hydraulics and Controls
  • Starters, Batteries and Alternators
  • Electrical
  • Operator Environment
  • Technology Products
  • Safety and Security
  • Fuel Systems
  • Guards
  • Attachments
  • Other Attachments
  • Field Installed Attachments
  • Bulldozer Installation Packages
  • Blades
  • Special Arrangements
  • COMPARE RELATED MODELS (SELECT UP TO 2)

    You can only compare up to two models. Please remove one of your current selections before making another.

    Compare Products