CALL US: 800-937-2326  

D5K2 Track-Type Tractor

  • OVERVIEW
  • SPECIFICATIONS
  • STANDARD / OPTIONAL
PRODUCT DESCRIPTION

Engine
  • Engine Model - Cat C4.4 ACERT
  • Power - Net - 104 mm H2O
  • Displacement - 269 in³
  • Bore - 4.13 in
  • Stroke - 5 in
  • Note - Engine meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.
  • Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 - 104 mm H2O
  • Rated Net Power - 2,200 rpm - SAE J1349 - 104 mm H2O
  • Transmission
  • Drive Pumps - 1
  • Maximum Travel Speed - Forward - 5.6 mile/h
  • Maximum Travel Speed - Reverse - 6.2 mile/h
  • Relief Valve Settings - 7033 psi
  • Track Motors - 2
  • Weights
  • Operating Weight - XL - 20313 lb
  • Operating Weight - LGP - 20992 lb
  • Service Refill Capacities
  • Cooling System - 5.92 gal (US)
  • Crankcase - With Filter - 2.91 gal (US)
  • Final Drive - Each - LGP - 2.6 gal (US)
  • Final Drive - Each - XL - 2.6 gal (US)
  • Fuel Tank - 51.5 gal (US)
  • Transmission - Hydraulic Tank - 15.7 gal (US)
  • Hydraulic Controls
  • Pump Output - 17.7 gal/min
  • Relief Valve Settings - 2988 psi
  • Undercarriage
  • Ground Contact Area - LGP - 4726 in²
  • Ground Contact Area - LGP, 762 mm (30 in) - 5514 in²
  • Ground Contact Area - XL - 3652 in²
  • Ground Pressure - LGP - 4.5 psi
  • Ground Pressure - LGP, 762 mm (30 in) - 3.93 psi
  • Ground Pressure - XL - 5.6 psi
  • Length - Track on Ground - LGP - 91 in
  • Length - Track on Ground - XL - 91 in
  • Shoe Width - LGP - 26 in
  • Shoe Width - LGP, 762 mm (30 in) - 30 in
  • Shoe Width - XL - 20 in
  • Track Gauge - LGP - 69 in
  • Track Gauge - LGP, 762 mm (30 in) - 73.2 in
  • Track Gauge - XL - 63 in
  • Ripper
  • Type - Parallelogram
  • Number of Shanks - 3
  • Height - 6.5 in
  • Weight - 1222 lb
  • Maximum Digging Depth - 13.3 in
  • Maximum Ground Clearance Under Tip - 17.6 in
  • Maximum Reach - Ground Line - 21.9 in
  • Overall Width - 67.3 in
  • Winch
  • Weight - 1345 lb
  • Winch Drive - Hydrostatic
  • Control - Hydraulic
  • Speed - Variable
  • Drum Capacity - Optional Cable - 256 ft
  • Drum Capacity - Recommended Cable - 371 ft
  • Drum Diameter - 10 in
  • Drum Width - 10.8 in
  • Maximum Line Pull - Bare Drum - 40000 lb
  • Maximum Line Pull - Full Drum - 25000 lb
  • Maximum Line Speed - Bare Drum - 131 ft/min
  • Maximum Line Speed - Full Drum - 207 ft/min
  • Overall Width - 29.2 in
  • Rope Diameter - Optional - 0.75 in
  • Rope Diameter - Recommended - 0.63 in
  • Throat Clearance - 6.75 in
  • Winch Length - 27.76 in
  • Cab
  • FOPS - ISO 3449:2005 Level II
  • ROPS - ISO 6396:2008
  • Sound Levels - ISO 6396:2008 - 79 dB(A)
  • Sound Levels - SAE J1166 FEB2008 - 79 dB(A)
  • Dimensions
  • BLADE: Blade Capacity (SAE) - Intermediate - 2.73 yd³
  • BLADE: Blade Capacity (SAE) - LGP - 3.06 yd³
  • BLADE: Blade Capacity (SAE) - XL - 2.86 yd³
  • BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate - 52° to 58°
  • BLADE: Blade Cutting Edge Angle, Adjustable - LGP - 52° to 58°
  • BLADE: Blade Cutting Edge Angle, Adjustable - XL - 52° to 58°
  • BLADE: Blade Height - Intermediate - 39.8 in
  • BLADE: Blade Height - LGP - 39.8 in
  • BLADE: Blade Height - XL - 42.2 in
  • BLADE: Blade Lift Height - Intermediate - 30.2 in
  • BLADE: Blade Lift Height - LGP - 30.2 in
  • BLADE: Blade Lift Height - XL - 30.2 in
  • BLADE: Blade Width - Intermediate - 115 in
  • BLADE: Blade Width - LGP - 126.7 in
  • BLADE: Blade Width - XL - 109.5 in
  • BLADE: Blade Width at Maximum Angle - Intermediate - 105.1 in
  • BLADE: Blade Width at Maximum Angle - LGP - 115.8 in
  • BLADE: Blade Width at Maximum Angle - XL - 103.8 in
  • BLADE: Digging Depth - Intermediate - 22.5 in
  • BLADE: Digging Depth - LGP - 22.5 in
  • BLADE: Digging Depth - XL - 23.1 in
  • BLADE: Maximum Angle (either side) - Intermediate - 25°
  • BLADE: Maximum Angle (either side) - LGP - 25°
  • BLADE: Maximum Angle (either side) - XL - 25°
  • BLADE: Maximum Tilt - Intermediate - 17.6 in
  • BLADE: Maximum Tilt - LGP - 17.6 in
  • BLADE: Maximum Tilt - XL - 15.8 in
  • Ground Clearance - LGP - 13 in
  • Ground Clearance - LGP, 770 mm (30 in) Shoes - 13 in
  • Ground Clearance - XL - 13 in
  • Length - Basic Tractor - Without Blade - LGP - 128.5 in
  • Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes - 128.5 in
  • Length - Basic Tractor - Without Blade - XL - 128.5 in
  • Overall Length - With Blade - LGP - 169.1 in
  • Overall Length - With Blade - LGP, 770 mm (30 in) Shoes - 169.1 in
  • Overall Length - With Blade - XL - 170.1 in
  • Track Gauge - LGP - 68.9 in
  • Track Gauge - LGP, 770 mm (30 in) - 73.2 in
  • Track Gauge - XL - 63 in
  • Tractor Height - LGP - 109 in
  • Tractor Height - LGP, 770 mm (30 in) - 109 in
  • Tractor Height - XL - 109 in
  • Width - Tractor - Standard Shoes - No Blade - LGP - 94.9 in
  • Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in) - 103.5 in
  • Width - Tractor - Standard Shoes - No Blade - XL - 83.1 in
  • Service Refill Capacities
  • Diesel Exhaust Fluid (DEF) Tank - 4.9 gal (US)
  • Undercarriage
  • Length - Track on Ground - LGP, 762 mm (30 in) - 91 in
  • Number of Rollers - Each Side - 7
  • Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage - 40
  • Number of Shoes - Each Side - SystemOne Undercarriage - 36
  • Weights
  • Note - Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
  • Operating Weight - LGP, 762 mm/30 in - 21442 lb
  • Standard Equipment
  • ELECTRICAL
  • OPERATOR STATION
  • HYDRAULICS
  • POWER TRAIN
  • UNDERCARRIAGE
  • OTHER STANDARD EQUIPMENT
  • ANTIFREEZE
  • Optional Equipment
  • ELECTRICAL
  • POWER TRAIN
  • UNDERCARRIAGE
  • OPERATOR STATION
  • HYDRAULICS
  • GUARDS
  • BLADES
  • REAR ATTACHMENTS
  • REAR ATTACHMENT CONTROL
  • MACHINE CONTROL AND GUIDANCE
  • STARTING AIDS
  • OTHER ATTACHMENTS
  • ANTIFREEZE
  • FIELD INSTALLED ATTACHMENT