815 Soil Compactor

Engine - Tier 4 Final/EU Stage V

Engine Model - Cat® C7.1: configured for two emissions options

Net Power (SAE J1349:2011) - 249 HP

Net Power (ISO 9249:2007) - 249 HP

Emissions - Meets U.S. EPA Tier 4 Final/EU Stage V emission standards

Rated Speed - 2200 r/min

Gross Power (SAE J1995:2014) - 284 HP

Engine Power (ISO 14396:2002) - 275 HP

Peak Torque - 1,400 rpm - 902 lb-ft @ 1400 rpm

Torque Rise - 52%

Bore - 4.1 in

Stroke - 5.3 in

Displacement - 427.8 in³

High Idle Speed - 2270 r/min

Low Idle Speed - 800 r/min

Maximum Altitude without Derating - 9842.5 ft

Note - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Engine - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA

Engine Model - Cat® C7.1: configured for two emissions options

Net Power (SAE J1349:2011) - 249 HP

Emissions - Brazil MAR-1 and China Nonroad Stage III, equivalent to U.S. EPA Tier 3/EU Stage IIIA

Rated Speed - 2200 r/min

Gross Power (SAE J1995:2014) - 286 HP

Engine Power (ISO 14396:2002) - 275 HP

Peak Torque - 1,400 rpm - 749 lb-ft @ 1400 rpm

Torque Rise - 26%

Bore - 4.1 in³

Stroke - 5.3 in

Displacement - 5.3 in

High Idle Speed - 2270 r/min

Low Idle Speed - 800 r/min

Maximum Altitude without Derating - 9842.5 ft

Note - Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Operating Specifications - Tier 4 Final/EU Stage V

Operating Weight - 49652 lb

Transmission

Transmission Type - Cat Planetary Power Shift

Travel Speeds - Forward - First - 3.9 mile/h

Travel Speeds - Forward - Second - 7.7 mile/h

Travel Speeds - Forward - Third - 11.3 mile/h

Travel Speeds - Reverse - First - 4.5 mile/h

Travel Speeds - Reverse - Second - 8.5 mile/h

Travel Speeds - Reverse - Third - 11.4 mile/h

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit - Pilot operated LS valve with EH

Lift/Tilt System - Variable displacement piston

Maximum Flow at 2,200 rpm - 23.5 gal/min

Relief Valve Setting - Lift/Tilt - 3190 psi

Pilot System - Open center, fixed displacement gear

Pilot Relief Valve Setting - 3046 psi

Hydraulic System - Steering

Steering System - Circuit - Pilot, Load Sensing

Steering System - Pump - Piston – Variable Displacement

Maximum Flow at 2,200 rpm - 38.8 gal/min

Relief Valve Setting - Steering - 4003 psi

Total Steering Angle - 84

Steering Cycle Times - High Idle - 3 s

Steering Cycle Times - Low Idle - 8.2 s

Service Refill Capacities

Fuel Tank - 132.1 gal (US)

Dimensions (Approximate)

Height - Top of Beacon - 12.9 ft

Service Refill Capacities

Diesel Exhaust Fluid Tank* - 4.2 gal (US)

Dimensions (Approximate)

Height - Top of Cab Roof - 12 ft

Height - Top of Exhaust Pipe - 11.1 ft

Service Refill Capacities

Cooling Systems - Tier 4 Final/EU Stage V - 21.4 gal (US)

Cooling System - Tier 3/Stage IIIA Equivalent - 19.3 gal (US)

Dimensions (Approximate)

Height - Top of Hood - 8.6 ft

Service Refill Capacities

Engine Crankcase - 5.3 gal (US)

Dimensions (Approximate)

Height to Top of Radiator Guard - 7.9 ft

Service Refill Capacities

Transmission - 14.8 gal (US)

Dimensions (Approximate)

Ground Clearance to Hitch - 1.2 ft

Service Refill Capacities

Differential - Final Drives - Front - 17.2 gal (US)

Dimensions (Approximate)

Ground Clearance to Transmission Guard - 1.2 ft

Service Refill Capacities

Differential - Final Drives - Rear - 17.2 gal (US)

Dimensions (Approximate)

Ground Clearance to Bottom of Bumper - 2.2 ft

Centerline of Rear Axle to Bumper - 6.5 ft

Hitch to Centerline of Front Axle - 5.5 ft

Service Refill Capacities

Hydraulic Tank Only - 19.8 gal (US)

Note - All non-road Tier 4 Final and Stage V diesel engines are required to use: – Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm for EPA and 10 ppm for EU (mg/kg) sulfur or less ULSD and when the biodiesel feedstock meets ASTM D7467 specifications. – Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specifications are required. – Diesel Exhaust Fluid (DEF) that meets all requirements defined in ISO 22241-1.

Dimensions (Approximate)

Wheel Base - 11 ft

Width over Platform - 10.3 ft

Height to Top of GPS Antenna - 12.1 ft

Overall Machine Length with Straight Blade - 23.5 ft

Overall Machine Length with EU Suppression - 24.9 ft

Axles

Front - Planetary – Fixed

Rear - Planetary – Oscillating

Oscillation Angle - ±10

Braking System

Service Brakes - Single Disc Wet (Enclosed) 2 WHL

Parking Brake - Drum and Shoe, Spring Applied, Hydraulic Released

Sound Performance - Tier 4 Final/EU Stage V - Standard

Operator Sound Level (ISO 6396) - 70 dB(A)

Machine Sound Level (ISO 6395) - 111 dB(A)

Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Note (2) - The operator sound pressure level uncertainty is ± 2 dB(A)

Note (3) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Note (4) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Sound Performance - Tier 4 Final/EU Stage V - Suppression

Operator Sound Level (ISO 6396) - 70 dB(A)

Machine Sound Level (ISO 6395) - 109 dB(A)

Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Note (2) - The operator sound pressure level uncertainty is ± 2 dB(A)

Note (3) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Note (4) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.

Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Standard

Operator Sound Level (ISO 6396) - 70 dB(A)

Machine Sound Level (ISO 6395) - 112 dB(A)

Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Note (2) - The operator sound pressure level uncertainty is ± 2 dB(A)

Note (3) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Note (4) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.

Sound Performance - Brazil Mar-1 and China Nonroad Stage III, Equivalent to Tier 3/EU Stage IIIA - Suppression

Operator Sound Level (ISO 6396) - 70 dB(A)

Machine Sound Level (ISO 6395) - 110 dB(A)

Note (1) - The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at the maximum engine cooling fan speed.

Note (2) - The operator sound pressure level uncertainty is ± 2 dB(A)

Note (3) - Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Note (4) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurement was conducted at the maximum engine cooling fan speed.

Sound Performance - Tier 4 Final/EU Stage V - Suppression EU

Machine Sound Level (ISO 6393) - 107 dB(A)

Note (1) - The machine sound power level was measured according to the test procedures and conditions specified in ISO 6393:2008. The measurement was conducted at the rated engine cooling fan speed.

Wheels

Weight - 9720 lb

Outside Diameter - 55.6 in

Drum Diameter - 40.5 in

Drum Width - 39 in

Tips per Row - 12

Tips per Wheel - 60

Replaceable - Weld On

Width - Over Drums - 127.7 in

Width Between Drums - 49.6 in

Tip Height - 7.5 in

Blades

Capacity - 2.69 yd³

Overall Width - 12.3 ft

Height - 2.8 ft

Digging Depth - 0.7 ft

Ground Clearance - 2.6 ft

Maximum Tilt - 1.1 ft

Turning Radius - Outside Corner of Blade - 21.1 ft

Turning Radius - Inside Face of Pusharm - 8.3 ft

Weight - 1764 lb

Total Operating Weight - 49652 lb