Compare Equipment Go Back
305 CR Mini Hydraulic Excavator |
|
|
|
Engine |
|||
---|---|---|---|
Net Power | 45 HP | - | - |
Engine Model | C1.7 Turbo | - | - |
Net Power - 2,400 rpm - ISO 9249, 80/1269/EEC | 45 HP | - | - |
Note | Advertised power is tested per the specified standard in effect at the time of manufacture. | - | - |
Gross Power - 2,400 rpm - SAE J1995:2014 | 48.4 HP | - | - |
Stroke | 3.9 in | - | - |
Bore | 3.3 in | - | - |
Displacement | 101 in³ | - | - |
Emissions | The Cat® C3.3B engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards. | - | - |
Weights |
|||
Operating Weight | 12688 lb | - | - |
Minimum Operating Weight with Canopy* | 11016 lb | - | - |
Note (1) | *Minimum Weight is based on rubber tracks, operator, full fuel tank, standard stick, straight blade, no bucket and no extra counterweight. | - | - |
Minimum Operating Weight with Cab* | 11234 lb | - | - |
Maximum Operating Weight with Cab** | 12688 lb | - | - |
Maximum Operating Weight with Canopy** | 12469 lb | - | - |
Note (2) | **Maximum Weight is based on steel tracks with pads, operator, full fuel tank, long stick, straight blade, extra counterweight and no bucket. | - | - |
Dimensions - Long Stick |
|||
Dig Depth | 144.5 in | - | - |
Stick Length | 63 in | - | - |
Track Width | 78 in | - | - |
Maximum Blade Depth | 23.4 in | - | - |
Maximum Dump Clearance | 151.4 in | - | - |
Boom Swing - Left | 615 mm | - | - |
Boom Swing - Right | 34.1 ° | - | - |
Swing Bearing - Height | 24.4 in | - | - |
Boom Height - Shipping Position | 74.6 in | - | - |
Boom In Reach | 101.6 in | - | - |
Maximum Reach | 235.8 in | - | - |
Track Belt/Shoe Width | 15.7 in | - | - |
Maximum Reach - Ground Level | 229.7 in | - | - |
Maximum Blade Height | 15.2 in | - | - |
O/A Shipping Height | 100.4 in | - | - |
Tail Swing without Counterweight | 43.1 in | - | - |
O/A Undercarriage Length | 101.6 in | - | - |
Tail Swing with Counterweight | 47.2 in | - | - |
Vertical Wall | 100.8 in | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - |
Overall Shipping Length* | 210.2 in | - | - |
Maximum Dig Height | 210.8 in | - | - |
Ground Clearance | 13.2 in | - | - |
Swing System |
|||
Boom Swing - Left | 72 Degrees | - | - |
Machine Swing Speed | 9 r/min | - | - |
Boom Swing - Right | 50 Degrees | - | - |
Dimensions - Standard Stick |
|||
Maximum Dig Height | 205.3 in | - | - |
Maximum Blade Height | 15.2 in | - | - |
Dig Depth | 134.6 in | - | - |
Boom Swing - Right | 34.1 ° | - | - |
Maximum Reach - Ground Level | 220.1 in | - | - |
Tail Swing without Counterweight | 43.1 in | - | - |
Boom Height - Shipping Position | 71.7 in | - | - |
Maximum Blade Depth | 23.4 in | - | - |
Maximum Reach | 226.6 in | - | - |
Boom Swing - Left | 24.2 ° | - | - |
Overall Shipping Length* | 208.9 in | - | - |
O/A Undercarriage Length | 101.6 in | - | - |
Swing Bearing - Height | 24.4 in | - | - |
Stick Length | 53.2 in | - | - |
Track Belt/Shoe Width | 15.7 in | - | - |
Boom In Reach | 101.2 in | - | - |
Vertical Wall | 91.9 in | - | - |
Tail Swing with Counterweight | 47.2 in | - | - |
Maximum Dump Clearance | 145.7 in | - | - |
O/A Shipping Height | 100.4 in | - | - |
Note | *Overall Shipping Length depends on blade position during shipment. | - | - |
Ground Clearance | 13.2 in | - | - |
Service Refill Capacities |
|||
Hydraulic Tank | 16 gal (US) | - | - |
Fuel Tank | 17 gal (US) | - | - |
Engine Oil | 1.6 gal (US) | - | - |
Hydraulic System | 20 gal (US) | - | - |
Cooling System | 2.9 gal (US) | - | - |
Travel System |
|||
Ground Pressure - Minimum Weight | 4 psi | - | - |
Maximum Traction Force - Low Speed | 11353 lbf | - | - |
Ground Pressure - Maximum Weight | 4.7 psi | - | - |
Travel Speed - Low | 1.7 mile/h | - | - |
Maximum Traction Force - High Speed | 5553 lbf | - | - |
Travel Speed - High | 3.1 mile/h | - | - |
Gradeability - Maximum | 30 degrees | - | - |
Blade |
|||
Angle Blade Width | 78 in | - | - |
Straight Blade Height | 15.4 in | - | - |
Straight Blade Width | 78 in | - | - |
Angle Blade Height | 15.7 in | - | - |
Angle Blade - Left | 25 degrees | - | - |
Angle Blade - Right | 25 degrees | - | - |
Sound |
|||
Average Exterior Sound Pressure (ISO 6395:2008) | 99 dB(A) | - | - |
Note | *The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed. **The labeled sound power level for the CE marked configurations when measured according to the test procedure a | - | - |
Operator Sound Pressure (ISO 6396:2008) | 72 dB(A) | - | - |
Hydraulic System |
|||
Auxiliary Circuit - Secondary - Pressure | 3843 psi | - | - |
Pump Flow at 2,400 rpm | 35 gal/min | - | - |
Operating Pressure - Swing | 2901 psi | - | - |
Operating Pressure - Travel | 3843 psi | - | - |
Auxiliary Circuit - Secondary - Flow | 7 gal/min | - | - |
Digging Force - Stick - Standard | 6362 lbf | - | - |
Auxiliary Circuit - Primary - Pressure | 3843 psi | - | - |
Auxiliary Circuit - Primary - Flow | 21 gal/min | - | - |
Digging Force - Bucket | 11061 lbf | - | - |
Operating Pressure - Equipment | 3843 psi | - | - |
Note | Flow and pressure are not combinable. Under load, as flow rises pressure goes down. | - | - |
Type | Load Sensing Hydraulics with Variable Displacement Piston Pump | - | - |
Digging Force - Stick - Long | 5665 lbf | - | - |
Certification - Cab and Canopy |
|||
Top Guard | ISO 10262:1998 Level I | - | - |
Roll Over Protective Structure (ROPS) | ISO 12117-2:2008 | - | - |
Tip Over Protective Structure (TOPS) | ISO 12117:1997 | - | - |
Weight Increase from Minimum Configuration |
|||
Counterweight | 534 lb | - | - |
Long Stick | 75 lb | - | - |
Steel Tracks with Pads | 827 lb | - | - |
Angle Blade | 225 lb | - | - |
Sustainability |
|||
Recyclability | 96% | - | - |
Add a Similar Product: