Compare Equipment Go Back
 MX350 Controller |
|
|
|
Controller Specifications |
|||
|---|---|---|---|
| Voltage Unbalance on Dropout for Source 1 and Source 2 | 5 to 20% of nominal | - | - |
| Delay NeutralTransition Time Delays (DT,DW) | 0-10 minutes | - | - |
| Control Power | 120 VAC | - | - |
| Undervoltage Dropout for Source 1 and Source 2 | 75-99% of nominal | - | - |
| Undervoltage Restore for Source 1 and Source 2 | 85-100% of nominal | - | - |
| Overfrequency Dropout for Source 1 and Source 2 | 50.1 - 63 Hz | - | - |
| Source Sensing | 120 - 690 VAC +/- 1% of nominal voltage (+/- .05 Hz, +/-.5 A) | - | - |
| Delay for Engine Cool Down (U) | 0-60 minutes | - | - |
| Underfrequency Restore for Source 1 and Source 2 | 45 - 59.5 Hz | - | - |
| Load Control Relay Contacts (2) | 0-259 minutes | - | - |
| Overvoltage Dropout for Source 1 and Source 2 | 105 - 110% of nominal | - | - |
| Voltage Unbalance for Restore for Source 1 and Source 2 | 4 to 19% of nominal | - | - |
| Storage Temperature | (-40˚C - 90˚C ) | - | - |
| Underfrequency Dropout for Source 1 and Source 2 | 45 - 59.9 Hz | - | - |
| Overfrequency Restore for Source 1 and Source 2 | 50 - 62.9 Hz | - | - |
| Delay Transfer to Nonpreferred Source (W) | 0-5 minutes | - | - |
| Operating Temperature Ambient | (-20˚C to 50˚C) | - | - |
| Communications Interface - Optional | Serial RS-485 upt to 115.2 Kbps or TCP/IP (10/100 base-T) | - | - |
| Overvoltage Restore for Source 1 and Source 2 | 103 - 108% of nominal | - | - |
| Load Control Relay Contacts (1) | rated for 10A @ 24VDC or 120VAC | - | - |
Technical Summary |
|||
| Rating Range | Switch Dependent | - | - |
| Transfer Type | Application Dependent | - | - |
| Switch Type | Application Dependent | - | - |
Add a Similar Product:
-
MX250 Microprocessor Controller Add
-
CTSM and CTGM Series Manual Transfer Switches Add
-
CTX Series Automatic Transfer Switch Add
-
MX150 Microprocessor Controller Add
-
-
-
CTS Series Automatic Transfer Switch Add
-
CTE Series Automatic Transfer Switch Add