Compare Equipment Go Back

R1700 Underground Mining Loader

Engine

Engine Model Cat® C13 - -
Engine Power - Stage V Engine - ISO 14396:2002 345 HP - -
Engine Power - Tier 3 Engine - ISO 14396:2002 361 HP - -
Engine Power - VR Engine - ISO 14396:2002 361 HP - -
Note (1) Power ratings apply at a rated speed of 1,800 rpm for LRCs (VR and Tier 3/Stage IIIA) engines when tested under the reference conditions for the specified standard. - -
Note (2) Power ratings apply at a rated speed of 2,050 rpm for HRC (Stage V) engine when tested under the reference conditions for the specified standard. - -
Note (3) All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications - -
Note (4) No engine derating required up to 2895 m (9,500 ft) altitude for Stage V engines, 3505 m (11,500 ft) altitude for Tier 3/Stage IIIA engines, and 3200 m (10,500 ft) for Tier 2/Stage II VR engines. - -
Note (5) Optional Ventilation Reduction package available. - -
Note (6) Optional engine with emissions equivalent to Tier 3 and Stage IIIA is also available. - -
Note (7) Optional engine meeting the U.S. EPA Tier 4 Final and EU Stage V emission standards is also available. - -

Operating Specifications

Nominal Payload Capacity 33069 lb - -
Gross Machine Mass - Loaded 138316 lb - -
Static Tipping Load - Straight Ahead - Lift Arms Horizontal 83218 lb - -
Static Tipping Load - Full Turn - Lift Arms Horizontal 69635 lb - -
Breakout Force - Lift and Tilt 53330 lb - -

Weights

Operating Mass* 95189 lb - -
Operating Mass* - Front Axle 38358 lb - -
Operating Mass* - Rear Axle 56831 lb - -
Operating Mass + Rated Payload* 128258 lb - -
Operating Mass + Rated Payload* - Front Axle 91412 lb - -
Operating Mass + Rated Payload* - Rear Axle 36846 lb - -
Note *Calculated weights. - -

Transmission

Forward - 1 3 mile/h - -
Forward - 2 5.7 mile/h - -
Forward - 3 10.2 mile/h - -
Forward - 4 17.9 mile/h - -
Reverse - 1 3.7 mile/h - -
Reverse - 2 6.5 mile/h - -
Reverse - 3 11.6 mile/h - -
Reverse - 4 20.2 mile/h - -

Hydraulic Cycle Times

Raise 6.8 s - -
Dump 3.3 s - -
Lower, Empty, Float Down 2.9 s - -
Total Cycle Time 13.2 s - -

Bucket Capacities

Bucket Capacities 5.7-8.6 m³ (7.5-11.2 yd³) - -
Dump Bucket - 1 - Standard Bucket 7.5 yd³ - -
Dump Bucket - 2 8 yd³ - -
Dump Bucket - 3 8.6 yd³ - -
Dump Bucket - 4 9.4 yd³ - -
Dump Bucket - 5 9.8 yd³ - -
Dump Bucket - 6 10.5 yd³ - -
Light Material Bucket 11.2 yd³ - -
Ejector Bucket 7.6 yd³ - -
Bolt Together Bucket (1) 8.9 yd³ - -
Bolt Together Bucket (2) 9.8 yd³ - -

Turning Dimensions

Outside Clearance Radius 272 in - -
Inner Clearance Radius 123.5 in - -
Axle Oscillation - -
Articulation Angle 44° - -

Tires

Tire Size 26.5R25 - -

Service Refill Capacities

Cooling System 19.8 gal (US) - -
Engine Crankcase 9.8 gal (US) - -
Hydraulic Tank 35.7 gal (US) - -

Service Capacities - Not Refill

Fuel System 128.4 gal (US) - -
DEF Tank 7.1 gal (US) - -
Front Differential and Final Drive 39 gal (US) - -
Rear Differential and Final Drive 37.2 gal (US) - -
Transmission 14.2 gal (US) - -
Add a Similar Product:
  • R3000H Underground Mining Loader Add
  • R2900G Underground Mining Loader Add
  • R1600H Underground Mining Loader Add
  • R1300G Underground Mining Loader Add