Compare Equipment Go Back
150 Motor Grader |
|
|
|
Weights |
|||
---|---|---|---|
Operating Weight - Typically Equipped | 43950 lb | - | - |
Gross Vehicle Weight - Maximum - Rear Axle | 38069 lb | - | - |
Operating Weight - Typically Equipped - Front Axle | 12549 lb | - | - |
Gross Vehicle Weight - Base - Front Axle | 9601 lb | - | - |
Gross Vehicle Weight - Base - Total | 38191 lb | - | - |
Moldboard |
|||
Blade Width | 12 ft | - | - |
Moldboard - Thickness | 0.87 in | - | - |
Cutting Edge Width | 6 in | - | - |
Cutting Edge Thickness | 0.6 in | - | - |
End Bit - Width | 6 in | - | - |
End Bit - Thickness | 0.6 in | - | - |
Moldboard - Blade Width | 12 ft | - | - |
Engine |
|||
Engine Model | Cat® C9.3 | - | - |
Bore | 4.5 in | - | - |
Stroke | 5.9 in | - | - |
Speed at Rated Power | 2,000 rpm | - | - |
Maximum Torque - VHP Plus | 920 ft·lbf | - | - |
Emissions | U.S. EPA Tier 4 Final/EU Stage V | - | - |
High Ambient - Fan Speed - Standard | 1,400 rpm | - | - |
VHP Plus Range - Net - Metric | 149-188 kW (202-255 hp) | - | - |
Standard Capability | 109 °F | - | - |
VHP Plus Range - Net | 149-188 kW (200-252 hp) | - | - |
Torque Rise | 39% | - | - |
Displacement | 567.5 in³ | - | - |
Number of Cylinders | 6 | - | - |
Derating Altitude | 10000 ft | - | - |
High Ambient - Fan Speed - Maximum | 1,550 rpm | - | - |
High Ambient - Fan Speed - Minimum | 500 rpm | - | - |
High - Ambient Capability | 122 °F | - | - |
Operating Specifications |
|||
Top Speed - Forward | 29 mile/h | - | - |
Top Speed - Reverse | 23 mile/h | - | - |
Turning Radius - Outside Front Tires | 25.59 ft | - | - |
Steering Range - Left/Right | 50° | - | - |
Articulation Angle - Left/Right | 20° | - | - |
Forward - 1st | 2.5 mile/h | - | - |
Forward - 2nd | 3.4 mile/h | - | - |
Forward - 3rd | 5 mile/h | - | - |
Forward - 4th | 6.9 mile/h | - | - |
Forward - 5th | 10.6 mile/h | - | - |
Forward - 6th | 14.5 mile/h | - | - |
Forward - 7th | 19.9 mile/h | - | - |
Forward - 8th | 29 mile/h | - | - |
Reverse - 1st | 2 mile/h | - | - |
Reverse - 2nd | 3.7 mile/h | - | - |
Reverse - 3rd | 5.4 mile/h | - | - |
Reverse - 4th | 8.4 mile/h | - | - |
Reverse - 5th | 15.7 mile/h | - | - |
Reverse - 6th | 23 mile/h | - | - |
Service Refill |
|||
Fuel Capacity | 104 gal (US) | - | - |
Cooling System | 15 gal (US) | - | - |
Hydraulic System - Total | 26.4 gal (US) | - | - |
Hydraulic System - Tank | 16.9 gal (US) | - | - |
Transmission - Differential - Final Drives | 18.5 gal (US) | - | - |
Diesel Exhaust Fluid | 5.8 gal (US) | - | - |
Engine Oil | 7.9 gal (US) | - | - |
Tandem Housing - Each | 20 gal (US) | - | - |
Front Wheel Spindle Bearing Housing | 0.13 gal (US) | - | - |
Circle Drive Housing | 1.8 gal (US) | - | - |
Power Train |
|||
Forward/Reverse Gears | 8 Forward/6 Reverse | - | - |
Transmission | APECS, Direct Drive, Powershift | - | - |
Brakes - Service | Multiple Oil Disc | - | - |
Brakes - Service - Surface Area | 3565 in² | - | - |
Brakes - Parking | Multiple Oil Disc | - | - |
Brakes - Secondary | Dual Circuit | - | - |
Hydraulic System |
|||
Circuit Type | Parallel | - | - |
Pump Type | Variable Piston | - | - |
Pump Output | 55.7 gal/min | - | - |
Maximum System Pressure | 3500 psi | - | - |
Reservoir Tank Capacity | 16.9 gal (US) | - | - |
Standby Pressure | 885 psi | - | - |
Frame |
|||
Drawbar - Width | 3 in | - | - |
Circle - Diameter | 60.2 in | - | - |
Circle - Blade Beam Thickness | 1.6 in | - | - |
Drawbar - Height | 6 in | - | - |
Front Frame Structure - Width | 12 in | - | - |
Front Frame Structure - Height | 12.6 in | - | - |
Circle - Height | 5.4 in | - | - |
Drawbar - Thickness | 0.5 in | - | - |
Front-Top/Bottom Plate - Width | 12 in | - | - |
Front-Top/Bottom Plate - Thickness | 0.87 in | - | - |
Front Axle - Height to Center | 23.5 in | - | - |
Front Axle - Wheel Lean - Left/Right | 18° | - | - |
Front Axle - Total Oscillation per Side | 32° | - | - |
Blade Range |
|||
Circle Centershift - Right | 28.7 in | - | - |
Moldboard Sideshift - Right | 26 in | - | - |
Maximum Blade Position Angle | 90° | - | - |
Blade Tip Range - Forward | 40° | - | - |
Blade Tip Range - Backward | 5° | - | - |
Maximum Shoulder Reach Outside of Tires - Right | 77.9 in | - | - |
Maximum Shoulder Reach Outside of Tires - Left | 70.5 in | - | - |
Ripper |
|||
Ripper Shank Holder Spacing | 21 in | - | - |
Ripping Depth - Maximum | 16.8 in | - | - |
Ripper Shank Holders | 5 | - | - |
Penetration Force | 20812 lb | - | - |
Pry-Out Force | 27794 lb | - | - |
Machine Length Increase, Beam Raised | 40.6 in | - | - |
Scarifier |
|||
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders | 11-May | - | - |
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum | 18.4 in | - | - |
Rear - Scarifying Depth, Maximum | 16.8 in | - | - |
Mid, V-Type - Working Width | 46.6 in | - | - |
Front, V-Type - Working Width | 47.4 in | - | - |
Front, V-Type, 5 or 11 Tooth - Working Width | 40.6 in | - | - |
Mid, V-Type - Scarifying Depth, Maximum | 11.5 in | - | - |
Mid, V-Type - Scarifier Shank Holders | 11 | - | - |
Mid, V-Type - Scarifier Shank Holder Spacing | 4.6 in | - | - |
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing | 4.6 in | - | - |
Rear - Working Width | 84 in | - | - |
Rear - Scarifier Shank Holders | 9 | - | - |
Rear - Scarifier Shank Holder Spacing | 10.5 in | - | - |
Standards |
|||
Steering | ISO 5010 | - | - |
ROPS/FOPS | ISO 3471/ISO 3449 | - | - |
Brakes | ISO 3450 | - | - |
Sound | ISO 6394; ISO 6395 | - | - |
Air Conditioning System |
|||
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. | - | - |
Tandems |
|||
Height | 19.9 in | - | - |
Width | 7.9 in | - | - |
Sidewall Thickness - Inner | 0.63 in | - | - |
Sidewall Thickness - Outer | 0.71 in | - | - |
Drive Chain Pitch | 2 in | - | - |
Wheel Axle Spacing | 60 in | - | - |
Tandem Oscillation - Front Up | 15° | - | - |
Tandem Oscillation - Front Down | 25° | - | - |
Dimensions |
|||
Height - Top of Cab | 130 in | - | - |
Length - Counterweight to Ripper | 399 in | - | - |
Width - Outside Front Tires | 98.9 in | - | - |
Length - Front Axle to Mid Tandem | 241 in | - | - |
Length - Front Tire to Rear of Machine | 351 in | - | - |
Length - Front Axle to Moldboard | 100 in | - | - |
Length - Between Tandem Axles | 60 in | - | - |
Width - Outside Rear Tires | 98.9 in | - | - |
Width - Tire Center Lines | 84.3 in | - | - |
Height - Front Axle Center | 23.5 in | - | - |
Height - Exhaust Stack | 128 in | - | - |
Height - Top of Cylinders | 120 in | - | - |
Ground Clearance - Rear Axle | 13.3 in | - | - |